Idan aka kwatanta da sauran molds, mold ɗin da ke haɗa bututun yana da tsari mafi daidaito da rikitarwa, kuma muna da buƙatu mafi girma don kulawa da kulawa da shi. Saboda haka, a cikin tsarin samar da molds na bututu, kulawa da kulawa da ta dace suna da amfani wajen inganta ingancin samarwa da kuma kiyaye samar da kayayyaki mai ɗorewa.
A yau, zan raba muku wasu gogewa game da ma'aikatanmu wajen kula da molds.
1. Bayan an sanya mold ɗin a kan injin ƙera allura, sai a fara amfani da mold ɗin da babu komai. A lura ko motsin kowanne ɓangare yana da sassauƙa, ko akwai wani abu da ba a saba gani ba, ko bugun fitar da mold ɗin da bugun buɗewa suna nan, ko saman rabuwar ya yi daidai sosai yayin matse mold ɗin, da kuma ko an matse sukurorin farantin matsi.
2. Idan ana amfani da mold ɗin, a kiyaye yanayin zafi na yau da kullun kuma a yi aiki a yanayin zafi na yau da kullun don tsawaita rayuwar mold ɗin.
3. Ya kamata a riƙa duba sassan injina na yau da kullun, kuma a shafa man shafawa idan ya dace, kamar su thimble, matsayin layi, sandar jagora, hannun riga na jagora. Musamman idan zafin ya yi yawa a lokacin rani, ya kamata a ƙara mai aƙalla sau biyu don kiyaye waɗannan sassan su yi aiki yadda ya kamata.
4. Bayan an yi amfani da mold ɗin, ya kamata a tsaftace ramin da kuma tsakiyarsa, kuma ba za a iya barin wani tarkace ba, don kada ya lalata saman mold ɗin da kuma feshi mai hana tsatsa.
5. Bai kamata a sami ragowar ruwan sanyaya a cikin tsarin sanyaya mold ba, kuma dole ne a tsaftace shi don hana mold ɗin yin tsatsa da toshe hanyar ruwan, don tsawaita tsawon rayuwar hanyar sanyaya.
6. A tsaftace saman ramin akai-akai. Lokacin gogewa, a yi amfani da kayan maye ko ketone sannan a busar da shi a kan lokaci domin hana ƙananan ƙwayoyin halitta da aka samar a lokacin aikin ƙera allurar su lalata ramin mold.
7. Lokacin da mold ɗin ke aiki, a hankali a duba yanayin aiki na kowane ɓangaren sarrafawa don hana rashin daidaituwa da dumama tsarin taimako.
8. Bayan mold ɗin ya fara aiki, a shafa maganin tsatsa a cikin ramin mold ɗin don guje wa tsatsa. A shafa fenti a wajen tushen mold ɗin don guje wa tsatsa.
9. Ya kamata a rufe mold ɗin sosai yayin ajiya don hana ƙura shiga cikin ramin da kuma haifar da tsatsa.
A ƙarshe, matakan kariya don kula da mold:
1. Dole ne a shafa wa sassan mold mai yayin kula da su a kullum
2. Dole ne a kiyaye saman mold ɗin da tsabta, kada a manna lakabi a saman mold ɗin.
3. Idan aka sami matsala a cikin mold yayin aikin samarwa, kamar fitar da ruwa mara kyau ko hayaniyar buɗewa da rufewa mai ƙarfi, nan da nan a dakatar da injin don dubawa da gyara akan lokaci. Kada a yi wasu ayyuka.
Lokacin Saƙo: Oktoba-27-2020